상품명 | Micro Vickers indenter_UPI/8105 |
---|---|
상품요약정보 | 마이크로 비커스 다이아몬드 압입자_ø3mm |
판매가 | 견적요청 |
국내·해외배송 | |
배송방법 | 직접배송 |
배송비 | 무료 |
SNS 상품홍보 | |
---|
옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
Micro Vickers indenter_UPI/8105 | 견적요청 ( ) |
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Shaft diameter: ø3mm
Calibration details: This Vickers Indenter complies with the requirements of DIN EN ISO 6507-2 and ASTM E92 Class B calibrated to standards by an ISO 17025 RvA accredited laboratory, with calibers traceable to Physikalisch-Technische Bundesanstalt National Metrology Institute, (PTB) Braunschweig, Germany.
RvA, UKAS DaKKS, COFRAC are ILAC signatories.Calibration temp.: (23 ± 2) °C
Relative humidity: < 70 %rh
Lowest test force: 1 gf
Validity: ISO 6507-2 recommends that the Vickers Diamond Indenter be directly verified after 2 years of use.
Uncertainty: The reported expanded uncertainty is based on the standard uncertainty of the measurement multiplied by a coverage factor k, such that the coverage propability corresponds to approximately 95%. The standard uncertainty is determined in accordance with EA 04/2.
Traceability: The measurements are executed using standards for which the traceability to (inter) national standards has been demonstrated towards the RvA.
Diamond surface appearance: According to the applicable standards.
Tip and edges: According to the applicable standards.
Condition of the surface: According to the applicable standards.
I. 본 상품들은 해외 제조사 (네덜란드 / INNOVATEST)에서 주문 생산으로 제작되는 경도 시험기로 거의 모든 시험기와 추가 부품들은 항공기를 이용한 항공 운송 방법을 이용하고 있습니다. 인천 공항에서 발주 업체까지 화물차 내륙운송과 시험기 설치 비용은 견적서에는 포함되어 있지는 않지만 무상으로 제공합니다. 단, 시험기 설치 지연으로 인한 장기간의 창고 보관, 수 차례 설치 방문 요청등 사용자의 부가적인 요청이 있을 경우, 시험기의 설치 장소와 추가 옵션, 개별 차등 운송방법에 따라 추가 가격이 발생합니다.
II. 반드시 계약전 설치 장소와 운송 종류를 미리 말씀 부탁드립니다.
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다